INNOVATEFIL COPOLYESTER TEMPERATURE+

Is an amorphous copolyester with high temperature resistance. Thanks to its high glass transition temperature and its amorphous nature, it allows you to make very large pieces without worrying about contractions. [gallery columns="2" size="large" ids="826,828"] The most important features of this material are: · High thermal resistance, achieving up to 110ºC. · Endurance against oils, grease and alcohol. · Styrene free. · Same chemical resistance as PETG · Stiffness similar to PC. · Good UV resistance.

USE RECOMENDATIONS:

PROTECT FROM MOISTURE

Innovatefil® COPOLYESTER TEMPERATURE+ is delivered in a vacuum bag with a great barrier against moisture so that the filament cannot absorb humidity. Before bagging, the filament follows the strictest quality controls by dehumidifying the raw material until the moisture content is lower than 0.02%. During the process the filament is cooled down by dry air and next it is bagged to make sure the product is the highest quality. Once the product is unpacked we recommend to keep it in a dry and dark environment. If not maintained in a suitable environment the material can absorb up to 0.5% atmospheric moisture, this can create water vapour in the extrusion that can end up in a bad surface finish.

USE A SUITABLE DEVICE FOR PRINTING

This material requires demanding printing conditions, an extruder that can reach 270 ºC and a hot bed able to reach 110 ºC, make sure that your printer can achieve these temperatures in order to make your working pieces.

KEEP THE EXTRUDER IN GOOD CONDITION

Once printing is finished it is recommendable to clean the nozzle eliminating the excess of material to avoid seals and defects unwanted, if several materials are used it is advisable to have a nozzle for each material to avoid being mixed.

INNOVATEFIL COPOLYESTER TEMPERATURE+

Es un copoliéster amorfo con gran resistencia a la temperatura. Gracias a su alta temperatura de transición vítrea y a su naturaleza amorfa, puedes realizar piezas de cualquier tamaño sin preocuparte de las contracciones. [gallery columns="2" size="large" ids="826,828"] Además, entre sus ventajas se destacan. • Alta resistencia térmica, llegando a alcanzar los 110 ºC • Resistencia a los aceites, grasas y alcoholes. • Libre de estirenos • Resistencia química de un PETG • Rigidez similar al Policarbonato • Buena resistencia UV

CONSEJOS DE USO Y RECOMENDACIONES:

PROTÉJASE DE LA HUMEDAD

Innovatefil® COPOLYESTER TEMPERATURE+ se entrega en una bolsa al vacío con una gran protección barrera frente a la humedad de manera que el filamento no pueda absorber la humedad ambiente. Previo a su embolsado el filamento sigue los controles más estrictos de calidad deshumidificando la materia prima hasta conseguir un contenido en humedad menor al 0.02%. Una vez desempaquetado el producto se recomienda mantenerlo en un ambiente seco y oscuro. Si no se mantiene en un ambiente idóneo el material puede absorber hasta un 0.5 % de humedad atmosférica, esto puede crear vapor de agua en la extrusión que confiera un mal acabado superficial

USE UN DISPOSITIVO ADECUADO PARA IMPRIMIR

Este material requiere condiciones de impresión exigentes, extrusor con capacidad de alcanzar los 270 ºC y una cama caliente capaz de alcanzar los 110 ºC, asegúrese de que su impresora tiene la capacidad de imprimirlo.

MANTENGA EL EXTRUSOR EN BUEN ESTADO

Al finalizar la impresión es necesario limpiar la boquilla eliminando el material sobrante para evitar obturaciones en la impresión. Si se utilizan varios materiales es recomendable disponer de una boquilla para cada material de manera que eviten ser mezclados.

Comments (0)

Product added to wishlist

At Smart Materials 3D we use our own and third party cookies. If you continue browsing, we consider that you accept its use Click here for more information.