PLA SKIN
ALL OF OUR SMARTFIL PLA CARRIES THE HIGH-SPEED SEAL, compatible with high-speed printers.
The PLA SKIN range is our series of skin color tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modeling and prototyping to achieve the most precise skin hue possible.
The filament PLA is a biodegradable plastic due to its natural origin (corn, sugarcane or potatoes). In addition, it is one of the most easy to print materials in the 3D printing world.
*In transition phase to RECYCLABLE Polystyrene reel.
APTO PARA TODAS LAS IMPRESORAS
BIODEGRADABLE
COMPOSTABLE
ALTA VELOCIDAD 300 mm/s
ALL OF OUR SMARTFIL PLA CARRIES THE HIGH-SPEED SEAL, compatible with high-speed printers.
The PLA SKIN range is our series of skin color tones, these are especially indicated for applications of anatomical models, medical splints and orthoses in general, as well as 3d modeling and prototyping to achieve the most precise skin hue possible.
The filament PLA is a biodegradable plastic due to its natural origin (corn, sugarcane or potatoes). In addition, it is one of the most easy to print materials in the 3D printing world.
*In transition phase to RECYCLABLE Polystyrene reel.
DESCRIPTION
ALL OF OUR SMARTFIL PLA CARRIES THE HIGH-SPEED SEAL, compatible with high-speed printers.
The filament PLA is a biodegradable plastic due to its natural origin (corn, sugarcane or potatoes). In addition, it is one of the most easy to print
materials in the 3D printing world.
Did you know...?
That PLA let you get 2 surface finishes? If the filament is extruded at a temperature lower than 225ºC, you’ll achieve a gloss finish, but if the temperature is over 225-230ºC you’ll get a matt finish.
What can you achieve with this material?
Print easily a lot of models with higher printing speed than other materials. You will not have pieces with warping as this material does not have contractions, so you will be able to print with high resolution models with a good surface finish.
Print your designs in many superb colours!
APPLICATIONS
- Anatomical models
- Orthoses
- Prototyping
- Decorative objects and figures
- large parts
APPLICATIONS
PRINT OPTIONS
- Temperatura de impresión
- 205-220ºC
- Velocidad de impresión
- 30-300mm/s
- Temperatura de la cama
- 50-60ºC
- Cámara cerrada
- N/A
- Ventilador
- 100%
MECHANICAL PROPERTIES
*Valores obtenidos sobre probetas impresas, noozle 0.4mm, infill rectilíneo 100%, altura de capa 0.2mm. Para más información contacta con nosotros.
MATERIAL PROPERTIES
RESISTENCIA AL IMPACTO
RESISTENCIA QUIMICA
RESISTENCIA TERMICA
RIGIDEZ
You might also be interested in
Comments