Cart
There are no more items in your cart
INNOVATEFIL® ASA GF
Anterior
Siguiente
INDUSTRIAL HIGH CAPACITY
RESISTENCIA AL IMPACTO
RESISTENCIA TERMICA
RESISTENCIA QUIMICA
APTO PARA TODAS LAS IMPRESORAS
INNOVATEFIL® ASA GF
ASA 15% FIBREGLASS is a fiberglass-reinforced (Acrylonitrile Styrene Acrylate) material, an ideal material that combines high thermal, UV and impact resistance, thanks to the addition of fiberglass, which improves its rigidity and reduces deformation under load.
INDUSTRIAL HIGH CAPACITY
RESISTENCIA AL IMPACTO
RESISTENCIA TERMICA
RESISTENCIA QUIMICA
APTO PARA TODAS LAS IMPRESORAS
ASA 15% FIBREGLASS is a fiberglass-reinforced (Acrylonitrile Styrene Acrylate) material, an ideal material that combines high thermal, UV and impact resistance, thanks to the addition of fiberglass, which improves its rigidity and reduces deformation under load.
DESCRIPTION
ASA FIBREGLASS is a (Acrilonitrilo Estireno Acrilato) reinforced with 15% glass fiber, is an ideal material that combines high thermal resistance, UV and impact resistance, thanks to the addition of glass fiber, which improves its rigidity and reduces the deformation of low load.
VENTAJAS:
- Greater mechanical resistance → Increase the rigidity and resistance to impacts.
- Less distortion (warping) → Reduce thermal contraction and improve dimensional stability.
- Better adhesion between capas → Make sure the pieces are more resistant and durable.
- Maximum thermal resistance → Will tolerate higher temperatures without losing their shape.
- Largest surface area → Ideal for pieces that need good support or mate support.
PRINT OPTIONS
- Printing Temperature
- 250-270ºC
- Speed Printing
- 30-50mm/s
- Bed Temperature
- 80-100ºC
- Closed Chamber
- N/A
- Fan
- 60-80%
MECHANICAL PROPERTIES
Mechanical Properties
Values
Measurement unit
Standard
Mechanical Properties*
Plane XY
Plane ZX
Tensile elongation (until break)
Plane XY
Plane XY
Measurement unit%
StandardISO 527
Alargamiento al esfuerzo máximo
Plane XY3,14
Plane XY
Measurement unit%
StandardISO 527
Bending elongation at break
Plane XY
Plane XY
Measurement unit%
StandardISO 178
Hardness
Plane XY
Plane XY
Measurement unitShore D
StandardISO 7619-1
Charpy impact force (notched)
Plane XY
Plane XY
Measurement unitkj/M2
StandardISO 179
Flexural modulus
Plane XY
Plane XY
Measurement unitMPa
StandardISO 178
Traction module
Plane XY1884
Plane XY
Measurement unitMPa
StandardISO 527
Flexural strength
Plane XY
Plane XY
Measurement unitMPa
StandardISO 178
Tensile strength
Plane XY19.32
Plane XY
Measurement unitMPa
StandardISO 527
*Valores obtenidos sobre probetas impresas, noozle 0.4mm, infill rectilíneo 100%, altura de capa 0.2mm. Para más información contacta con nosotros.
MATERIAL PROPERTIES
Materials Properties
PRINTING DIFFICULTY
RESISTENCIA AL IMPACTO
RESISTENCIA TERMICA
RIGIDEZ
You might also be interested in
LATEST NEWS
FROM OUR BLOG
Comments