Smart Materials 3D Resin Castable is a blue wax-based photopolymer suitable for LCD / MSLA and DLP printers.

Printed parts capture intricate features and show details with razor sharpness.

It offers smooth surfaces that facilitate the optimal melting process.

It supports organic geometries with high resolution positive and negative engravings that will give your designs high detail.

It allows to create castings for jewellery, dental and industrial in a perfect way.







Ideal temperature for use

Due to the high amount of wax, Castable will solidify around 17 to 18ºC.

For use in environments below 18ºC it is necessary to heat the product to its perfect viscosity, recommending a temperature of 20ºC as optimal.

To achieve this, we can leave it for 5 hours at room temperature or place it in its packaging in a warm environment. (Without direct light and perfectly closed) for 20 minutes at a maximum of 50ºC.

Quality recommendations

To achieve optimum results in casting, a layer thickness of less than 0.05mm and a perfectly calibrated printer are recommended.

You can write to us at to get the ideal parameters for your printer and how to calibrate it.

Details for perfect printing.

On some anodized aluminium surfaces such as the Elegoo Mars printer, the wax may suffer from low adhesion, so we recommend making some changes to the support.

The raft of the supports has a large area and often pulls on the platform part.

Changing the raft height and raft thickness to 0.1mm will fix most of these problems.

Compatible with 385-405nm DLP and LCD  3D PRINTERS

  • Ackuretta FreeShape 120
  • Ackuretta Dentiq
  • Anycubic Photon
  • Anycubic Photon Zero
  • Anycubic Photon Mono
  • Anycubic Photon Mono SE
  • Anycubic Photon Mono X
  • Asiga Max
  • Asiga Pro 4K
  • Atum3D DLP Station 5
  • Beam3D Prism
  • Carima IM2
  • Creality LD-002R
  • Creality LD-002H
  • Creality Halot-One
  • Creality Halot-Sky
  • Cubicon Lux
  • DWS DigitalWax 028
  • Elegoo Mars
  • Elegoo Mars 2 & Mars 2 Pro
  • Elegoo Mars 3
  • Elegoo Saturn
  • EPAX X1N
  • EPAX X10 Color
  • EPAX X10 & E10 Mono
  • EPAX X1K E6
  • Formlabs Form 1+
  • Formlabs Form 2
  • Kelant S400
  • Kudo3D Bean
  • Miicraft 125
  • Orange Longer 30
  • Peopoly Moai
  • Peopoly Phenom L
  • Peopoly Phenom Noir
  • Phrozen Shuffle
  • Phrozen XL
  • Phrozen Sonic Mini & XL 4K
  • Phrozen Sonic Mini 4K
  • Phrozen Sonic Mighty 4K
  • Prusa SL1
  • Qidi Tech Shadow 5.5S
  • Shining3D AccuFab-D1
  • Sprintray Moonray S & D
  • UnionTech Cute300
  • Uniz Slash
  • W2P Solflex Series
  • W2P Sollab Series
  • Wanhao Duplicator 7
  • XYZ Nobel 1.0A
  • Zortrax Inkspire

Part orientation

Depending on the type of geometry, a position is recommended for your pieces,

For this reason, we are going to name some of the most common cases like rings with engraving. In this case the orientation is very important. We advise to print them at an angle of 20 degrees instead of printing vertically.

This is because, this way we minimize the possibility of overcuring the engravings.

In this example, we show the best orientation graphically:

Post-Processing of Smart Materials 3D Castable

It is essential that the pieces after washing and drying must have with a matt surface finish and not sticky.

Excess resin or sticky surfaces can react with the investment material and create pores in the castings.

It is important to use the anti-aliasing or blur parameters so that the printed parts do not show visible layers, since these layers will be reproduced in the final casting.


Resin designed to carry out the lost wax process, capable of capturing complex characteristics of the piece and clearly capturing its details. Indicated for the creation of molds for jewellery, dental pieces, or industrial pieces.

Product added to wishlist

At Smart Materials 3D we use our own and third party cookies. If you continue browsing, we consider that you accept its use Click here for more information.