INNOVATEFIL POLYCARBONATE Is an advanced filament with great resistance against impact. It has high resistance to thermal deformation and very good dimensional stability. This material has been designed to be used for 3D printing so the contractions are minimal during use. Some of its advantages are: • Resistance to impact pretty high. • High strength and stiffness. • High resistance to thermal deformation. • Good chemical insulation properties. [gallery columns="2" size="large" ids="810,809"]

USE RECOMENDATIONS:

PROTECT FROM MOISTURE

Innovatefil® POLYCARBONATE is delivered in a vacuum bag with a great barrier against moisture so that the filament cannot absorb humidity. Before bagging, the filament follows the strictest quality controls by dehumidifying the raw material until the moisture content is lower than 0.02%. During the process the filament is cooled down by dry air and next it is bagged to make sure the product is the highest quality. Once the product is unpacked we recommend to keep it in a dry and dark environment. If not maintained in a suitable environment the material can absorb up to 0.5% atmospheric moisture, this can create water vapour in the extrusion that can end up in a bad surface finish.

USE A SUITABLE DEVICE FOR PRINTING

This material requires demanding printing conditions, an extruder that can reach 270 ºC and a hot bed able to reach 110 ºC, make sure that your printer can achieve these temperatures in order to make your working pieces.

KEEP THE EXTRUDER IN GOOD CONDITION

Once printing is finished it is recommendable to clean the nozzle eliminating the excess of material to avoid seals and defects unwanted, if several materials are used it is advisable to have a nozzle for each material to avoid being mixed.INNOVATEFIL® POLYCARBONATE Filamento que dispone de una elevada resistencia a la deformación térmica y muy buena estabilidad dimensional. Es un material diseñado para su uso en impresión 3D por lo que presenta un bajo nivel de contracciones. Entre sus ventajas destacan:
  • Resistencia al impacto extremadamente elevada.
  • Resistencia y rigidez elevadas.
  • Elevada resistencia a la deformación térmica.
  • Buenas propiedades de aislamiento eléctrico.
[gallery columns="2" size="large" ids="810,809"]

CONSEJOS DE USO Y RECOMENDACIONES:

PROTÉJASE DE LA HUMEDAD

Innovatefil® POLYCARBONATE se entrega en una bolsa al vacío con una gran protección barrera frente a la humedad de manera que el filamento no pueda absorber la humedad ambiente. Previo a su embolsado el filamento sigue los controles más estrictos de calidad deshumidificando la materia prima hasta conseguir un contenido en humedad menor al 0.02%. Una vez desempaquetado el producto se recomienda mantenerlo en un ambiente seco y oscuro. Si no se mantiene en un ambiente idóneo el material puede absorber hasta un 0.5 % de humedad atmosférica, esto puede crear vapor de agua en la extrusión que confiera un mal acabado superficial

USE UN DISPOSITIVO ADECUADO PARA IMPRIMIR

Este material requiere condiciones de impresión exigentes, extrusor con capacidad de alcanzar los 270 ºC y una cama caliente capaz de alcanzar los 110 ºC, asegúrese de que su impresora tiene la capacidad de imprimirlo.

MANTENGA EL EXTRUSOR EN BUEN ESTADO

Al finalizar la impresión es necesario limpiar la boquilla eliminando el material sobrante para evitar obturaciones en la impresión. Si se utilizan varios materiales es recomendable disponer de una boquilla para cada material de manera que eviten ser mezclados.
Producto añadido a tu lista de deseos

En Smart Materials 3D utilizamos cookies propias y de terceros. Si continuas navegando, consideramos que aceptas su uso. Click aquí para más información.